Matchless Laurel Canyon Amplifier

  • $2,780.00

* This is a custom order : Build time 3-6 weeks (e-mail for more info)

Laurel Canyon


The Laurel Canyon is a 20 Watt 6V6 amp with a 5AR4/GZ34 Tube rectifier. Wired in Class A with a dual push/pull output transformer. Output tubes are on a fixed resistor Cathode self –bias circuit.


The Pre Amp is two 12AX7/ECC83’s, Phase Inverter 12AX7/ECC.

The Laurel Canyon comes optional with Reverb and the Effects Loop is standard.


Controls are Volume, Bass, Mid, Treble, and Master Volume

Reverb is run on two 12AX7/ECC83’s and drives through a 2 spring reverb tank. The reverb signal is also parallel to the input signal so there is no loss in tone or power when it’s turned up.


The speaker is the UK made Celestion Heritage G12H30 at 8 ohms.


The Speaker outs are comprised of a single 4 Ohm out and an 8 Ohm out, which can only

be used individually one at a time.


Effects Loop is a ¼” Send and ¼” Return non buffered loop. Only time base effects are recommended such as Reverbs, delays, chorus, etc… Boost and Gain pedals are recommended to placed in the front of the amp to avoid clipping the Phase Inverter.


Cabinet Dimensions are 20” Wide X 18.50” Tall X 9.75” Deep

Weight: 46 pounds / 20.86 kg